|Payment Type: ||L/C, T/T|
|Min. Order: ||1|
Model NO.: PSJ-150T Type: Preform Injection Structure: Horizontal Plastic Type: Thermoplastic Plasticizing Way: Screw Type Clamping Way: Mechanical Automation: Automatic Computerized: Computerized Certification: CE, ISO9001:2008 Trademark: plastar Specification: CE CQC Origin: China
The variable pump from prestigious campony ,YUKEN or VIKERS with the advantages of smoothly running and silence hydraulic system.
Special design to advoid noise
Save 30-50% energies,especially for long produce circle product it will save more.
By circle filter ,prolong oil life and ensure hydraulic elements running normal.
Also can save much cooling water as the variable pump system is less relieve hot .
|Device ||Item ||Model ||PSJ-150 |
|A ||B ||C |
|Injection Device ||Screw diameter ||mm ||40 ||45 ||48 |
|Screw L/D ratio ||L/D ||22.5 ||20 ||18.75 |
|Theoretical shot volume ||cm3 ||251 ||318 ||362 |
|Injection weight(PS) ||g ||228 ||289 ||329 |
|Injection pressure ||Mpa ||229.7 ||181.5 ||159.5 |
|Injection rate(ps) ||g/s ||77 ||98 ||111 |
|Plastizing capacity(ps) ||g/s || 11.6 ||17.2 ||20.6 |
|Screw speed range ||r/min ||0~200 |
|Making-up Device ||Clamping force ||KN ||1500 |
|Clearance between tie bars ||mm ||410×410 |
|Opening stroke ||mm ||400 |
|Max.Mould height ||mm ||430 |
|Min.Mould height ||mm ||150 |
|Ejector force ||KN ||33 |
|Ejector stroke ||mm ||120 |
| Other ||Pump power ||KW ||15 |
|Heating power ||KW ||9.27 |
|Oil tank capacity ||L ||270 |
|Machine weight ||t ||4.5 |
|Weight dimension ||mm ||4.6×1.2×1.8 |
|Specifications are subject to change without prior notice.|
Contact us if you need more details on Plastic Injection Machine
. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Injection Molding Machine
、Machine. If these products fail to match your need, please contact us and we would like to provide relevant information.
Product Categories : Injection Molding Machine