Model No.: SB20L/1
Technical Parameter | ||||
Item | Unit | Parameter | ||
INJECTION UNIT |
|
| ||
screw diameter | mm | 65 | 70 | 75 |
screw L/D ratio | L/D | 22.6 | 21 | 19.6 |
theoretical shot volume | cm*3 | 1061 | 1231 | 1413 |
shot weight(ps) | g | 966 | 1120 | 1286 |
injection pressure | Mpa | 203 | 175 | 152 |
theoretical injection rate(ps) | g/s | 308 | 357 | 410 |
plastic capacity | g/s | 50.6 | 60.5 | 71.5 |
CLAMPING UNIT |
|
| ||
max.clamping force | KN | 3800 | ||
max.opening stroke | mm | 680 | ||
space between tie bars | mm | 680x680 | ||
Mould height | mm | 250-710 | ||
max.daylight | mm | 1390 | ||
OTHER |
|
| ||
pump motor power | KW | 37 | ||
pump pressure | Mpa | 16 | ||
heating power | KW | 25 | ||
size | m | 6.8x2.0x2.3 | ||
net weight | t | 15 | ||
oil tank capacity | L | 820 |
Product Categories : General injection molding machine