The new designs & characteristic for IBM35 1.It adopts only one girder for the injection and blowing positions. there will be more space on the work table, and then it is easy to install the moulds. the core rods gyration semidiameter is more then before, now the products height is increased to 175mm. 2.Its hydraulic system adopts the Proportional Electro-Hydraulic Load Sensing Piston Pumps-Single Pump, it is energy-saving, high-efficiency. There is less return oil, when there is no load in the hydraulic system, oil temperature will be low, it can protect the hydraulic oil. 3. Injection clamping moulding sections structure is improved, to ensure it can lock the Injection Mould better. 4. The work table is cast by ductile cast iron, and it is more thick, more strong and more steady. 5,.Figure is be improved, it will be hold much less space, and is looks nice. IBM35 Injection Blow Mouding Machine Main Technical Parameters No. | Item | Unit | Data | No. | Item | Unit | Data | 1 | Dia of screw | Mm | 40 | 13 | die-heating power | Kw | automation | 2 | Max. the oretical capacity | Cm3 | 186 | 14 | pressure of hydraulic system | Mpa | 14 | 3 | Total power for cylinder-heating | Kw | 6.5 | 15 | Max. working pressure of comp. air | Mpa | 1.2 | 4 | control force of injection mold | Qty | 3 | 16 | discharge rate of compressed air | M3/min | 0.8m3/min | 5 | clamping force of injection mold | Kn | 350 | 17 | consumption of cooling water | M3/h | 3 | 6 | opening stroke | Mm | 120 | 18 | dimension of machine(L×W×H) | Mm | 3100×1100×2200 | 7 | clamping force of blow mold | Kn | 30 | 19 | machine weight | T | approximately 3.0 | 8 | opening stroke of blow mold | mm | 120 | 20 | range of formability products | L | 0.003-0.6 | 9 | idle time | S | 3 | 21 | height of formability products | Mm | ≤175mm | 10 | Max. plate size of die(L×W) | Mm | 300*200 | 22 | die of formability products | Mm | ≤100mm | 11 | min. die thickness | Mm | 180 | 23 | conveyer belt Motor power | Kw | 0.1 | 12 | motor power | Kw | 15 | 24 | total power | kw | 25 | Cavity number of one mold corresponding to products volume.(for references) Product volume(ML) | 8 | 15 | 20 | 40 | 60 | 80 | 100 | Cavity quantity | 10 | 7 | 6 | 5 | 5 | 4 | 3 | Contact us if you need more details on Injection Blow Machine. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Injection Blow Molding Machine、Blow Machine. If these products fail to match your need, please contact us and we would like to provide relevant information. Product Categories : blow moulding machine
|
|
|